Menvier30/40/100/300
The bottom line of the display
shows each item from the rest of
the menu in turn.
Press .
b.
Go to: 3. Finishing Setting on
page 24.
Ward based Systems
Do this:
The bottom line of the display
shows the first item in the setting
options menu.
If any ward is already set then the
system will skip to point b.
Press or to show "Wards".
a.
"Wards" is the second item down
on the setting options menu (or
third if a part set is available).
b.
Press
.
The bottom line of the display shows
the state of the first ward:
U = Unset
S = Full Set
P = Part Set
Press or to select the
c.
change that you want.
"U>P" = change to Part Set.
"U>S" = change to Full Set.
"S>U" = change to Unset
"P>U" = change to Unset
Press or to show any other
d.
Wards to which you have access.
Note that the installer may have
3. Setting and Unsetting
The display shows:
↕
↕
↕
↕
↕
Page 23