Redirecting Speech Messages - Eaton Menvier 20 Administrator's And User Manual

Menvier30/40/100/300
1. Make sure the display shows the
standby screen.
2. Press .
3. Key in your access code (or
present a tag).
Press  until you see:.
4.
Press .
5.
Press  until the display shows:
6.
Press .
7.
Press  until the display shows
8.
Telephone Number 1 or 2, or IP
Address 1 or 2 as instructed by
your installer.
Press .
9.
The display shows:
Followed by a series of progress
messages:
(Press  if you decide you want to
abandon the call.)
The control unit calls the installer's
computer on the number you
selected.
Your system may be connected to
Downloader for several minutes.
When Downloader has finished and
the connection is broken the
display shows the time and date.

Redirecting Speech Messages

Note: This option is available only if you have the a speech dialler module
fitted inside the control unit and it has been programmed by the
4. Administration




















Page 105