Eaton Menvier 20 Administrator's And User Manual page 104

4. Administration
output.
OR (if you do not have the remote in
your possession)
a) Press .
The display presents a list of the
registered remote controls and
their users.
Press  or  to show the
b)
remote control you want to edit.
Press  to select it.
c)
The display shows the first
button on the remote control.
Press  or  to show the button
d)
you wish to re-program.
Press  to select the button.
e)
The bottom line shows the first in
a list of the options that you can
assign to the button:
Note: You cannot reprogram the unset
key on a remote control or
FOB-2W-4B to operate an
output.
10. Press  until the display shows:
11. Press  .
The display shows the first in a
list of outputs that are available
for allocating to a remote button.
The bottom line of the display
shows any name the output has
been programmed with.
12. Press  or . until the display
shows the output you wish to
select.
Note: There may be only one
Page 98
Menvier30/40/100/300















