Menvier30/40/100/300
2. If you are unsetting a ward and setting the same ward again then you
must program the setting event to occur at least 10 minutes after the
unsetting event.
Calendar Set Example
Not available on the Menvier30.
As an example, assume that you wish to set the alarm system every
evening during the days Monday to Friday, and unset the alarm system
every morning on Monday to Friday (leaving the system set over the
weekend). In addition, you want the system to remain set on May Bank
Holiday Monday, which occurs on 2 May in 2011.
First of all, you would program May 2
1.
Make sure the display shows the
standby screen.
2.
Press
.
3.
Key in your access code (or
present a tag).
Press until you see:.
4.
Press .
5.
Press until the display shows:
6.
Press .
7.
Press until the display shows:
8.
Press .
9.
The display shows:
10. Key in a name to remind you of the
exception, for example:
11. Press .
The keypad gives a double "beep"
confirmation tone. The keypad
nd
as an exception:
4. Administration
Page 81