Seeing Which Communications Module Is Currently Installed - Eaton Menvier 20 Administrator's And User Manual

Menvier30/40/100/300
Press  repeatedly to leave the
7.
menu.
Seeing Which Communications Module Is
Currently Installed:
1. Make sure the system is idle.
2. Press .
3. Key in your access code (or
present a tag).
Press  until you see:
4.
Press .
5.
Press . until the display shows:
6.
Press .
7.
The bottom line of the display
shows the module type currently
fitted (or the word "None" if no
module is fitted).
Press  repeatedly to leave the
8.
menu.
4. Administration


















Page 109