Eaton Menvier 20 Administrator's And User Manual page 32

3. Setting and Unsetting
line of the display shows the part
of the system being set, the
bottom line shows "Final Door
Set".
b. Leave by the designated exit door.
c. Remember to close the door.
The system sets.
Lock Set:
a. The keypad sounds the exit tone
(an interrupted tone if the final exit
door is open, a continuous tone if
the exit door is closed). The top
line of the display shows the part
of the system being set, the
bottom line shows "Lock Set".
b. Leave by the designated exit door.
c. Remember to close the door.
d. Wait until you can hear a
continuous tone and then lock the
door.
The system sets.
How Do I Know The System Is Set?
When the system sets the keypad
briefly shows:
(The keypad may show the name of the
installer instead.)
In a part set system, one of four LEDs
glows to show which part of the system
is set.
Note: The installer may have disabled
the LEDs to ensure that the
Page 26
Menvier30/40/100/300








followed by:

