Adding Users - Eaton i-on16 Administrator's And User Manual

i-on16
Press 
9.
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
The control unit has deleted the
identity of the Hold Up Alarm (or
other device you selected).
To register a new device, re-enter the Menu and select Users - Edit User.
Select your own user name and then the device type you wish to add.
If a remote control or two-way keyfob has been stolen and the user it
belonged to no longer has an access code on the system, see page 74.

Adding Users

You must be a Master user to add new users, see page 34.
When adding a new user you can also assign to them proximity tags,
remote controls and Hold Up Alarm transmitters. If you do not wish to
assign these devices when you create the user, then each user must
assign those devices to themselves by using the Users - Edit User option.
To add a new user:
1. Make sure the display shows the
standby screen.
2. Press .
3. Key in your Master User access
code (or present a suitable tag).
Press  .
4.
Press .
5.
Press .
6.
The display shows a default user
name for the next available free
user, for example: "User 04".
At this point you can edit the name
"User 04" simply by pressing the
digit keys. Pressing  will delete


followed by:














4. Administration
Page 45