Configure Monitor Settings - Polycom G7500 Administrator's Manual

Output
FHD
Supported HDMI Output Resolutions for Dual-Monitor Setups
Your G7500 system supports the following HDMI output resolutions and frame rates when using two
monitors.
Note: 4K resolution (3840 × 2160p) isn't supported when you configure your system for dual
monitors. If you want to use 4K, set Monitor 2 to Off in the system web interface.
Supported HDMI Output Resolutions and Frame Rates for Dual-Monitor Setups
Output
FHD
Supported HDMI Input Resolutions
Your G7500 system supports the following monitor resolutions for HDMI input.
Supported HDMI Input Resolutions and Frame Rates
Input
UHD (4K)
FHD
HD

Configure Monitor Settings

You can optimize your G7500 system video output for single- and dual-monitor setups.
Interlaced modes aren't supported.
Procedure
1. In the system web interface, go to Audio/Video > Monitors.
2. Configure the following settings (your changes save automatically):
Polycom, Inc.
Resolution
1920 × 1080p
Resolution
1920 × 1080p
Resolution
3840 × 2160p
1920 × 1080p
1280 × 720p
Configuring Video and Camera Settings
Frame Rates (fps)
50, 60
Frame Rates (fps)
50, 60
Frame Rates (fps)
24, 25, 30
50, 60
50, 60
77