Table of Contents
Advertisement
Feeding Roll Paper Manually
After feeding the roll paper, you can move it forward and back.
1. Select the paper setting display area on Home screen.
1.
2.
2. Select paper source.
3.
3. Select Feed/cut.
4. Tap or touch Advance and Rewind to move roll paper forward or back.
4.
Note
•
• Tapping Advance or Rewind moves the roll paper approximately 0.04 inch (1 mm).
Touching Advance or Rewind moves the roll paper until you release the key. If "Cannot advance
the paper any further." appears on the touch screen, release the key.
5. Select OK when you have determined position of roll paper.
5.
294
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the imagePROGRAF PRO-6600 and is the answer not in the manual?
Questions and answers