4) Release the hook and remove the gear [1]. The remaining part is the
pressure roller [2].
[2]
Precautions for Installation of Pressure Roller
When reinstalling the pressure roller, pay attention to the following:
1. The pressure roller bearing must be in touch with the leaf spring [1].
2. The left and right bearings [2] must be installed properly.
[1]
8.4.4 Fixing Delivery Paper Sensor
8.4.4.1 Removing the Delivery Sensor
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the front cover and front-left cover.
2) Remove the boss [1], and then slide the guide (front) [2] upward to remove
it.
3) Disconnect the connector [1], and remove the delivery sensor [2] with the
claw released.
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
[1]
F-8-21
[2]
F-8-22
[1]
[2]
F-8-23
8.4.5 Delivery Full Sensor
8.4.5.1 Removing the Delivery Full Sensor
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the fixing unit.
2) Disconnect the connector [1], and then remove the delivery full sensor [2]
with the hook released.
0011-5390
[2]
[1]
F-8-24
[2]
[1]
F-8-25
Chapter 8
0011-5391
8-7