Duplex Pick-Up Solenoid; Removing The Duplex Pickup Solenoid; Registration Clutch; Removing The Registration Clutch - Canon MF6500 Series Service Manual

Chapter 7
3) Remove the two bosses [1], disconnect the connector [2], and then slide
the registration sensor unit [3] toward you to remove it.
[2]
4) Remove the registration sensor [1] by releasing the hook.

7.6.12 Duplex Pick-up Solenoid

7.6.12.1 Removing the Duplex Pickup Solenoid

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the left cover and rear-right cover.
2) Remove the fan duct, main motor, relay PCB, registration clutch, pickup
drive unit, main drive unit, and fixing/drive unit.
3) Remove the screw [1], and then remove the duplex pickup solenoid [2].
7-10
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
[2]
[1]
F-7-27
[3]
[1]
F-7-28
[1]
F-7-29
When installing the duplex pickup solenoid, be sure to install the solenoid le-
ver [1] on the arm [2].

7.6.13 Registration Clutch

7.6.13.1 Removing the Registration Clutch

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Detach the rear cover.
2) Remove the connector [1] and E-ring [2], and then remove the registration
clutch [3].
0011-5380

7.6.14 Main Motor

7.6.14.1 Removing the Main Motor

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Detach the rear cover.
[1]
F-7-30
[2]
[1]
F-7-31
[3]
[1] [2]
F-7-32
[2]
0011-5379
0011-5476