McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual page 75

UltraNet ConfigManager automatically assigns a name and
number to each icon that represents the UltraNet Edge 3000, for
example Node10 and Node20.
The node icons and their corresponding names are also displayed
under the NetMap1 heading in the TreeView Area on the left.
16. Continue configuring the Network Map by using the appropriate
chapter for the type of network you are configuring, beginning
with the "Setting the Initial Configuration" section:
— If you are configuring an implementation using E_port
extension over an Ethernet WAN, use
an E_Port Extension over an Ethernet WAN
— If you are configuring an implementation using F_port over
an Ethernet WAN, use
Extension over an Ethernet WAN
— If you are configuring an implementation using E_port
extension over an ATM WAN, use
E_Port Extension over an ATM WAN
— If you are configuring an implementation using FICON
extension over an Ethernet WAN, use
FICON Extension
— If you are configuring a FC/SCSI Tape Pipelining
implementation, use
Extension as an example.
Chapter 5, Configuring
Chapter 6, Configuring an F_Port
as an example.
Chapter 7, Configuring an
as an example.
Chapter 8, Configuring
as an example.
Chapter 9, Configuring Tape Device
Building a Custom Edge 3000 Chassis
Building the Custom Chassis
as an example.
4-7
4