ZPCM Compression
Diagnostic Program
(ZPCT)
The UltraNet Edge 3000 ZPCM Compression diagnostic program
resides on the UltraNet Edge 3000's flash drive as the file zpct.dll.
Using the PROM interface, the file must be loaded into memory and
executed from there.
This program tests the UltraNet Edge 3000's ZPCM Compression
module and verifies that it can read uncompressed data from buffer
memory, compress the data, and write the compressed data back to
buffer memory.
It also verifies that the ZPCM Compression module can read
compressed data from buffer memory, uncompress the data, and
write the uncompressed data back to buffer memory.
Individual tests can be selected from the menu or the 99. Execute All
option can be used to run tests 7 through 23 for single module and 7
through 35 for two modules.
*> SBTM ZPCM Diagnostic Test Revision 1.1 - 12/07/2001 <*
MAIN MENU
Options={ SINGLE
STOP
Run={
}
Parameters={ 1000
1000
{*ZPC2#0:B#5/D#02:Rev C: E0100000
{ 40000000
41000000
{ 40800000
41800000
{ ENA_INT
OWN_BIT_ENA
{ COPY SEND/RCV
0. Exit Diagnostic
M/B Varied Byte C/U
1. Set Options
M/B Varied Data C/U
2. Set Parameters
CE1/2 M/B Cmp/Ucmp
3. Compress Test
CE1/2 M/B Incr Byt C/U
4. Uncompress Test
CE1/2 M/B Incr Pkt C/U
5. Chained Pkts Cmp Test
CE1/2 M/B Incr P/B C/U
6. Chained Pkts Unc Test
CE1/2 M/B Var Byte C/U
7. Comp/Uncomp Test
CE1/2 M/B Var Data C/U
8. Incr Byte C/U Test
Debug Utilities
9. Incr Packet C/U Test
Run Cmp/Uncomp Tests
UltraNet Edge 3000 Diagnostic Programs
0 1 }
Total Errors={ 0 } Tests
0
1
0
1020304
100000
42000000
43000000 }
42800000
43800000 }
ENA_POLL }
CE1/CE2
Inc/Ran
1020102 }
14. Wr Lmt Rcvry C/U Tst
15. Split Rcvry C/U Test
16. Wr Lmt Rcvry Cmp Tst
17. Wr Lmt Chain Cmp Tst
18. CE1/2 Cmp/Ucmp Test
19. CE1/2 Incr Byte C/U
20. CE1/2 Incr Pkt C/U
21. CE1/2 Incr P/B C/U
22. CE1/2 Var Byte C/U
23. CE1/2 Var Data C/U
Troubleshooting and Diagnostics
Incrementing }
100800 }
28.
29.
30.
31.
32.
33.
34.
35.
77.
95.
13-27
13
Need help?
Do you have a question about the ULTRANETTM EDGE STORAGE ROUTER 3000 and is the answer not in the manual?
Questions and answers