McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual page 379

Configure as NTP Use the following procedure to configure the Time Synchronization
Client
Protocol as an NTP client:
1. Access the Time Synchronization Protocol dialog box in UCM by
2. Double-click the Time Server icon
3. Select NTP Server and enter the NTP server address in the Server
4. Click OK.
Disable the Time Use the following procedure to turn off the Time Synchronization
Synchronization
Protocol completely.
Protocol
1. Follow step and step in the procedure above.
double-clicking an Edge node
The UltraNet Edge Expanded View screen appears.
UltraNet Edge Expanded View screen.
The Time Synchronization Protocol screen appears.
Address field. The address set for the NTP server must be
accessible through the Maintenance Port.
Time Synchronization Protocol
in the Network Map.
in the Logical View of the
D-7