Fibre Channel Diagnostic Program (Fcbb) - McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual

UltraNet Edge 3000 Diagnostic Programs
13
Fibre Channel
Diagnostic Program
(FCBB)
McDATA UltraNet Edge 3000 User Guide
13-22
***** PASSED--- DMA Incr Byte Test
failed = 0
DMA Incr Packet Test running...
***** PASSED--- DMA Incr Packet Test
failed = 0
DMA Incr Pkt/Byte Test running...
***** PASSED--- DMA Incr Pkt/Byte Test
failed = 0
DMA1/2 Test running...
***** PASSED--- DMA1/2 Test
failed = 0
DMA1/2 Incr Byte Test running...
***** PASSED--- DMA1/2 Incr Byte Test
failed = 0
DMA1/2 Incr Packet Test running...
***** PASSED--- DMA1/2 Incr Packet Test
failed = 0
DMA1/2 Incr Pkt/Byte Test running...
***** PASSED--- DMA1/2 Incr Pkt/Byte Test
failed = 0
The UltraNet Edge 3000 Fibre Channel diagnostic program resides on
the UltraNet Edge 3000's flash drive as the file fcbb.dll. Using the
PROM interface, the file must be loaded into memory and executed
from there.
This program tests the UltraNet Edge 3000's Fibre Channel module
and verifies that it can perform memory transfer functions to the local
memory and the global memory. Test data can be looped back either
internally or externally.
Individual tests can be selected from the menu or the 99. All Tests
option can be used to run tests 3 through 22.
*> SBTM Fibrhannel BB Diagnostic Test Rev. 1.1 - May 04,
2003 <*
MAIN MENU
Options={ SINGLE STOP
Run={ }
Parameters={ 648 10000
01020304 }
{ BUFFER_BLD COMPARE_DATA
}
{*FC-BB#0:B#1/D#1:PCI#1: D0010000 D0080000 40221000
44000000 }
{ 20 0 Internal Loopback
{ BUFFER_MEM 2.13 Gbps RATE }
{*FC-BB#1:B#2/D#1:PCI#2: D4010000 D4080000 40221000
44000000 }
{ 20 0 Intrd }
0 1 } Total Errors={ 0 } Tests
00 0011 1 4 AAL5
BUFFER_CLR ADD_CRC_TO_OB
FPGA Ver 12 FC-BB Board }
passed = 1,
passed = 1,
passed = 1,
passed = 1,
passed = 1,
passed = 1,
passed = 1,
Random