McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual page 194

Configuring a 1x1 Ethernet Wide Area Network
8
McDATA UltraNet Edge 3000 User Guide
8-22
4. Click Next.
The Create Data Path Wizard - Choose Network Routing Option
dialog box is displayed.
5. Select either Dedicated Circuit, Fail Over, or Load Balancing in
the Network Routing Options. .
• If you are creating a 1x1 configuration, the only selectable routing
type is Dedicated Circuit. All other options in this dialog box are
grayed out and ignored.