McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual page 248

Configuring Tape Device Extension
9
McDATA UltraNet Edge 3000 User Guide
9-40
The default is 8.
Show Source
WWN
Filtering
Discover
LUN Count
Select Fibre
Channel
Topology
12. Configure the Fibre Channel topology by selecting one of the
following choices in the Address Type drop-down menu:
Soft —
Hard —
P2P —
13. From the LUN 0 drop-down menu, select either Emulate or
Passthru.
The Fibre Channel topology comes up dynamically as
fabric or loop.
The Fibre Channel topology is forced to come up as a
loop.
The Fibre Channel topology is forced to come up as
point-to-point.
LUN 0