McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual page 131

11. Click the Finish button.
The Network Map should now look similar to this:
• If you are creating a 1x1 configuration, the only selectable routing
type is Dedicated Circuit.
• If you are creating a 2x2 configuration with FC Switch interfaces,
you only need to create one data path between the Fibre Channel
Switch interfaces, as there is only one instance of the Fibre
Configuring an F_Port Extension over an Ethernet WAN
Configuring a 2x2 Ethernet Wide Area Network
6
6-25