McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual page 241

3. Enter the LUN of the tape drive (usually LUN zero) in the LUN
field. See Table 8-5 (page -7) and the screen below for an example.
4. Click OK.
5. Double-click on the Device Extension interface 20
20.
6. Click the Host tab.
7. Click in the Dest WWN/LUN field to map the 1st LUN to node
10. The field turns into a drop-down menu, click anywhere within
the field to show the menu.
Configuring Tape Device Extension
Configuring Tape Device Extension
9
on Node
9-33