McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual page 70

Building the Custom Chassis
4
Configure Node10
McDATA UltraNet Edge 3000 User Guide
4-2
Use the following procedure to start the Custom Chassis Wizard:
1. Select the Nodes tab located on the toolbar between the TreeView
Area and the Network Map.
The Nodes tab displays three drop-down menus.
2. Click the drop-down menu for the UltraNet Edge 3000 Series.
Links tab
Interface tab
Nodes tab
UltraNet Edge 1000 Series
UltraNet Edge 3000 Series
3. Select the Edge3000 (Custom Chassis).
4. Place your cursor over the Network Map Area, it will turn to
crosshairs.
5. Click to activate the Custom Chassis Wizard.