McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual page 220

Configuring Tape Device Extension
9
McDATA UltraNet Edge 3000 User Guide
9-12
If this is the first time you are adding an Edge node to the
Network Map, the Default Fibre Channel Interface Type
drop-down list will appear. Select the type of Fibre Channel
interface for the network type you are configuring.
— The first time you see the Default Fibre Channel Interface
Type drop-down list, select the interface type you want as the
Fibre Channel I/F default. This sets the type of Fibre Channel
interface as the default UltraNet ConfigManager will use in
each configuration, unless you change it. When configuring
Device Extension over an Ethernet WAN, select Fibre
Channel Device Extension.
— If you have previously added an Edge node and need to
change the default Fibre Channel interface type, click the
Tools menu, then Options and select the appropriate interface
type from drop-down list.
4. Move the cursor to another part of the map and click a second
time to create a second instance of the same type of node. Your
screen should look like the example below.