CHAPTER 7 PICK-UP / FEEDING SYSTEM
D. Transfer Drum Assembly
1. Construction
[1] Separation claw
[2] Separation charging assembly
[3] Separation push-up roll
[4] Transfer drum
[5] Transfer blade
[6] Attraction roller
[7] Attraction brush
[8] Internal static eliminator
[9] Transfer cleaner push-on brush
[10] Transfer polishing roller
[11] Transfer drum cleaner
[12] External static eliminator
The one-way clutch is in operation while the transfer drum is on the transfer
drum frame. Do not rotate the transfer drum while keeping your fingers in an
opening of the transfer drum.
The transfer drum, on the other hand, will rotate in reverse when it is off the
frame. Keep this in mind. (Allowing it to rotate in reverse can damage the
transfer blade, attraction brush, and transfer drum side scraper.)
7-88
COPYRIGHT © 2002 CANON INC.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2] [3] [4]
[9]
[8]
[12]
[11]
[10]
Figure 7-839
[7]
[6]
[5]