Removing The Compartment - Canon 1130 Service Manual

2. Removing the Compartment

1) Place paper or the like [3] (about 8 cm
high) on the floor for placement of the
deck [2] (to prevent deformation of the
roll support [1]).
2) Disconnect the deck from the copier, and
push down the latch plate [5] of the
compartment [4] to open the compartment
[4].
3) Remove the right cover.
4) Remove the screw [6] of the harness
guide, and disconnect the connector [7].
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 PAPER DECK
[3]
[1]
Figure 10-315
[5]
(rear)
Figure 10-316
Figure 10-317
[2]
[3]
[4]
[6]
[7]
10-25