Removing The Standard White Plate - Canon 1130 Service Manual

CHAPTER 3 EXPOSURE SYSTEM

3. Removing the Standard White Plate

1) Remove the vertical size plate.
2) Remove the copyboard glass.
3) Remove the two screws [1], and detach
the standard white plate cover [2].
4) Remove the two screws [3], and detach
the left stay [4].
5) Remove the two screws [5], and detach
the standard white plate [6].
4. Mounting the Standard White Plate
Mount the standard white
plate [a] as shown, i.e., its
cut-off [b] is toward the
front [c].
1) Place the standard white plate [6] by
butting it against the right stay [7].
2) Secure the left stay [4] in place with two
screws [3] as if to butt it against the
standard white plate [6].
3) Secure the standard white plate [6] in
place with two screws [5].
3-10
COPYRIGHT © 2002 CANON INC.
[1]
[4]
[3]
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 3-404
[5]
[3]
[5]
Figure 3-405
[b]
[c]
Figure 3-406
[2]
[7]
[6]
[a]