3) Remove the three screws [3], and
disconnect the connector [4]; then, detach
the front upper cover [5].
4) Remove the two screws [6], and detach
the upper cover [7].
B. Paper Deck - Related Work
1. Removing the Deck from the Copier
1) Place paper or the like [3] (about 8 cm
high) on the floor for placement of the
deck [2] (to prevent deformation of the
roll support plate [1]).
COPYRIGHT © 2002 CANON INC.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 PAPER DECK
[4]
[3]
Figure 10-310
[6]
Figure 10-311
[2]
[3]
[1]
Figure 10-312
[5]
[7]
[3]
10-23