Duplexing Unit; Removing The Duplexing; Removing The Feed Roller - Canon 1130 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM
C. Duplexing Unit

1. Removing the Duplexing

1) Remove the right center cover, right front
cover, face cover, and cassette switch
cover.
2) Open the waste toner box cover.
3) Slide out the duplexing unit.
4) Remove the two screws [1], and remove
the two stopper plates [2].
5) Remove the duplexing unit.

2. Removing the Feed Roller

1) Slide out the duplexing unit.
2) Detach the paper retaining guide plate [1]
by squeezing it slightly.
3) Remove the two resin E-rings [2], and
detach the feed roller [3] from the feed
roller shaft.
The feed roller is identi-
fied by color (front and
rear):
Use the white feed roller
for the front.
Use the black feed roller
for the rear.
7-64
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
Figure 7-741
[1]
Figure 7-742
[2]
Figure 7-743
[2]
[3]