Removing The Attraction Brush; Remove The Transfer Blade; Removing The External Static Eliminator - Canon 1130 Service Manual

4. Removing the Attraction Brush

1) Turn the locking lever [1] clockwise to
free the lock.
2) Remove the screw [2], and pull out the
attraction brush [3].

5. Remove the Transfer Blade

1) Turn the locking lever [1] clockwise to
free the lock.
2) Remove the screw [2]; then, pull out the
transfer blade [3].
When pulling out the
transfer blade, take care
not to bring the plastic
film into contact with the
flange.
6. Removing the External Static
Eliminator
1) Remove the fixing assembly cover.
2) Remove the screw [1], and remove the
leaf spring [2].
3) Remove the screw [3], and pull off the
external static eliminator [4].
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
[2]
Figure 7-852
Figure 7-853
[3]
Figure 7-854
[3] [1]
[1]
[3]
[2]
[2] [1]
[4]
7-93