12) Press 'FUNCTION'.
13) Press 'INSTALL'.
14) Press 'HP-STR-4'.
Be sure to wait until the
indication on the control
panel is 'READY' before
executing HP-STR-4 in
service mode.
15) Press 'OK'.
16) Wait until the toner (4 colors) inside the
hopper has been stirred fully (about 2 min).
F. Supplying the Starter
Developer
1) Press 'SPLY-K'.
Be sure to wait until the
indication on the control
panel is 'READY' before
executing
service mode.
2) Press 'OK'.
COPYRIGHT © 2002 CANON INC.
SPLY-K
in
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
11-19