Canon 1130 Service Manual page 859

CHAPTER 13 TROUBLESHOOTING
Level 3
SP-ON-N1 Use it to adjust the separation re-charging ON
environment adjustment value for single-sided
copying and copying on the 1st side of a double-
sided copy.
SP-ON-N2 Use it to adjust the separation re-charging ON
environment adjustment value for copying on the
2nd side of a double-sided copy using plain paper.
SP-ON-L1 Use it to adjust the separation re-charging on
environment adjustment value for single-sided
copying or copying on the 1st side of a double-sided
copy using thin paper.
SP-CN-L2 Use it to adjust the separation re-charging on
environment adjustment value for copying on the
2nd side of a double-sided copy using thin paper.
SP-ON-T1 Use it to adjust the separation re-charging on
environment adjustment value for single-sided
copying and copying on the 1st side of a double-
sided copy using thick paper.
SP-ON-T2 Use it to adjust the separation re-charging on
environment adjustment value for copying on the
2nd side of a double-sided copy using thick paper.
SP-ONUT1 Use it to adjust the separation re-charging on
environment adjustment value for single-sided
copying and copying on the 1st side of a double-
sided copy using extra thick paper.
SP-ONUT2 Use it to adjust the separation re-charging on
environment adjustment value for copying on the
2nd side of a double-sided copy using extra thick
paper.
SP-ON-S1 Use it to adjust the separation re-charging on
environment adjustment value for single-sided
copying and copying on the 1st side of a double-
sided copy using special paper 1.
SP-ON-S2 Use it to adjust the separation re-charging on
environment adjustment value for single-sided
copying and copying on the 1st side of a double-
sided copy using special paper 2.
SP-ONOHP Use it to adjust the separation re-charging on
environment adjustment value using transparencies.
SP-ON-PT Use it to adjust the separation re-charging on
environment adjustment value using postcards.
Note 1: Execute this mode upon replacement of a CPU PCB or initialization of the RAM. The settings
will be returned to standard settings, requiring you to enter the appropriate settings. Be sure to
record any new settings on the service label.
13-270
COPYRIGHT © 2002 CANON INC.
Description
CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
COPIER>ADJUST
Remarks
1 to 32
In this mode, the blue offset is
decreased; check the setting
of COPIER>ANALOG-ABS-
HUM, and enter the
appropriate value (1 through
32) from below.
1: all environment OFF
2: 3.03 g or less
3: 3.42 g or less
4: 3.81 g or less
5: 4.21 g or less
6: 4.60 g or less
7: 4.99 g or less
8: 5.38 g or less
9: 5.77 g or less
10: 6.17 g or less
11: 6.65 g or less
12: 7.13 g or less
13: 7.61 g or less
14: 8.09 g or less
15: 8.57 g or less
16: 9.05 g or less
17: 9.53 g or less
18: 10.01 g or less
19: 10.50 g or less
20: 11.44 g or less
21: 12.38 g or less
22: 13.32 g or less
23: 14.26 g or less
24: 15.20 g or less
25: 16.00 g or less
26: 16.80 g or less
27: 17.60 g or less
28: 18.40 g or less
29: 19.20 g or less
30: 20.00 g or less
31: 20.80 g or less
32: 21.60 g or less
For instance, in the case of 5
g, enter '8' for the paper type
in question so that the
separation re-charging
mechanism will turn on when
the moisture content is 0 to
5.38 g.