Remove The Brush - Canon 1130 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM
6) Remove the E-ring [6] from the rear side
plate of the transfer drum, and detach the
separation claw unit.
Pay attention to the spring
on the shaft of the separa-
tion claw unit.
7) Remove the two screws [7], and detach the
separation push-up solenoid [8].
12. Remove the Brush Motor (M11)
1) Remove the transfer drum from the
transfer drum frame.
2) Remove the four screws [1], and remove
the two transfer sheet scrapers [2].
7-98
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 7-866
[8] [7]
Figure 7-867
[2]
[1]
Figure 7-868
[6]
[2]
[1]