CHAPTER 11 INSTALLATION
VIII. INSTALLING THE
CASSETTE HEATER
1) Open the shipping box of the cassette
heater, and check to make sure that the
following is available:
[1]Cassette heater for 200-V model
(FG2-9812-000) ...................... 1 pc.
[2] Relay harness
(FG6-2422-000) ...................... 1 pc.
[3]Screw (XA9-0628-000) ........... 2 pc.
2) Turn off the copier's power switch, and
disconnect the power plug from the power
outlet.
3) Slide out the cassettes 1 and 3 (1, 2, and 3
in the case of the CLC1130/1160), and
remove the inside cassette from each.
11-46
COPYRIGHT © 2002 CANON INC.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
Figure 11-801
Cassette
Figure 11-802
[3]