Detecting Jams; Outline - Canon 1130 Service Manual

CHAPTER 10 PAPER DECK
II.

DETECTING JAMS

A. Outline
The side paper deck is equipped with the sensor shown in Figure 10-201 to monitor the
movement of paper. A jam is identified by reading signals from the sensor at such times as
programmed in advance in the copier's DC-CPU. When the DC-CPU identifies a jam, it will
discharge all paper moving ahead of the jam, stop the ongoing operation, and then indicate jam
removal instructions on its control panel.
PS101
Copier
Figure 10-201
Sensor Name Description
PS101 Deck pickup sensor Detects a delay jam.
Table 10-201
10-17
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)