Canon 1130 Service Manual page 115

CHAPTER 3 EXPOSURE SYSTEM
5) Remove the rear cover and the rear upper
cover.
6) Remove the upper cover.
7) Remove the left stay [1] and the standard
white plate [2]; then, detach the right stay
[3].
Mount the standard white
plate [a] so that its cut-off
[b] is toward the front [c].
8) Remove the flywheel.
9) Remove the original exposure cooling fan
1.
10) Remove the four screws [4], and detach
the RDF mount (left rear, on the fixing
assembly side) [5].
3-12
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]
[2]
[1]
Figure 3-408
[b]
[c]
Figure 3-409
[5]
[4]
Figure 3-410
[a]
[4]