Canon 1130 Service Manual page 847

CHAPTER 13 TROUBLESHOOTING
Level 1 Level 2
ADJUST
Level 1 Level 2
ADJUST
13-258
COPYRIGHT © 2002 CANON INC.
FEEDER>ADJUST Items
Level 3 Settings
ADJ-RX 0 to 255
ADJ-RY 0 to 255
ADJ-DX 0 to 255
ADJ-DY 0 to 255
PRJ>ADJUST Items
Level 3 Settings
DS-PRJ 0 to 31
DS-OHP 0 to 31
RD-XS -300 to +300
RD-XE -300 to +300
RD-YS -300 to +300
RD-YE -300 to +300
DA-XS -99 to +99
DA-XE -99 to +99
DA-YS -99 to +99
DA-YE -99 to +99
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Description
adjustment of registration in sub scanning
direction with the multifeeder in use (in units
of 0.1 mm)
adjustment of registration in main scanning
direction with the multifeeder in use (in units
of 0.1 mm)
adjustment of registration in sub scanning
direction with the multifeeder in use in
manual feed mode (in units of 0.1 mm)
adjustment of registration in main scanning
direction with the multifeeder in use in
manual feed mode (in units of 0.1 mm)
Description
adjustment of the slice level for the
projection area with the projector in use
adjustment of the slice level for original
detection from the reference sheet position
of film with the projector in use
adjustment of the read area with original
detection OFF and with the projector in use
(in units of 0.06 mm; standard: 0)
adjustment of the read area with original
detection OFF and with the projector in use
(in units of 0.06 mm; standard: 0)
adjustment of the read area with original
detection OFF and with the projector in use
(in units of 0.06 mm; standard: 0)
adjustment of the read area with original
detection OFF and with the projector in use
(in units of 0.06 mm; standard: 0)
adjustment of the read area with original
detection ON and with the projector in use
(in units of 0.11 mm; standard: 0)
adjustment of the read area with original
detection ON and with the projector in use
(in units of 0.11 mm; standard: 0)
adjustment of the read area with original
detection ON and with the projector in use
(in units of 0.06 mm; standard: 0)
adjustment of the read area with original
detection ON and with the projector in use
(in units of 0.06 mm; standard: 0)
CLC1120/1130/1150 only