CHAPTER 9 EXTERNALS / AUXILIARY MECHANISMS
2) Remove the old flash memory PCB from
the CPU PCB.
3) Mount the new flash memory to the CPU
PCB.
4) Turn on the power switch.
5) Select FUNCTION>CLEAR-DC-CON,
R-CON and MMI-COPY in service
mode; then, press the OK key.
6) Turn off and then on the power switch.
7) Enter the data values recorded in step 1).
8) Execute FUNCTION>CCD>CCD-ADJ
in service mode.
9) Turn off and then on the power switch.
9-34
COPYRIGHT © 2002 CANON INC.
CANON CLC1100/1130/1150/1160/1180 REV.1 JAN. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)