Canon 1130 Service Manual page 604

Adjusting the Deck Separation
7
Roller Pressure
If double feeding or pickup failure occurs
when pickup is from the side paper deck,
adjust the position of pressure spring of the
deck separation roller.
• If pickup failure occurs, move the
position of the spring in the direction
of arrow A.
• If double feeding occurs, move the
position of the spring in the direction
of arrow B.
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
A
B
Figure 13-263
13-35