Removing The Fixing Lower Roller - Canon 1130 Service Manual

6. Removing the Fixing Lower Roller

1) Open the front cover.
2) Remove the fixing cover.
3) Slide out the transfer drum frame.
4) Remove the fixing assembly unit.
5) Remove the screw [1], and slide the fixing
inlet guide [2] to the rear to detach.
6) Remove the fixing lower heater.
7) Open the fixing upper roller unit.
8) Remove the screw [3], and shift the heater
faston base [4].
9) Pull out the fixing lower roller as shown.
When mounting the fix-
ing lower roller, take care
so that it will not be dam-
aged by the thermistor.
10) Remove the metal fixing from the fixing
lower roller; then, detach the gear,
bearing, heat-insulating bush, and collar.
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 FIXING SYSTEM
[2] [1]
Figure 8-411
[4]
[3]
Figure 8-412
Figure 8-413
8-17