Movement Of The Lifter - Canon 1130 Service Manual

3. Movement of the Lifter

Part 2>Chapter 6>2.2.3
The multifeeder lifter is constructed as shown in Figure 7-209.
The multifeeder tray open/closed sensor monitors the state (open/closed) of the multifeeder
tray so as not to drive the lifter motor while the multifeeder tray is closed.
E040
The lifter sensor does not turn on within a specific period of time after the
lifter motor has turned on.
Item
Multifeeder lifter motor (M15)
Multifeeder lifter sensor (PS17)
Multifeeder lifter sensor (PS18)
Multifeeder tray open/closed sensor (PS62)
-B3
-B4
M15
Multifeeder
lifter motor
COPYRIGHT © 2002 CANON INC.
Table 7-209
DC driver PCB
J1017-B16
-B13
Pickup driver PCB
Multifeeder
lifter sensor
(up; PS17)
Sensor lever
Multifeeder
pickup rollers
(front)
Multifeeder tray
open/closed
sensor (PS62)
Figure 7-209
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
Description
Drives the lifter.
Detects the position of the lifter (up).
Detects the position of the lifter (down)
Detects the state (open/closed) of the lifter tray.
-B9
Paper
Multi-
Slide guide
feeder
pickup
sensor
(PS15)
Multifeeder lifter
Lifter plate
-B12
Multifeeder
lifter sensor
(down; PS18)
Sensor lever
7-17