Canon 1130 Service Manual page 446

4) Temporarily secure the drum motor
assembly [7] to the copier with seven
screws [8].
5) Mount the drum shaft positioning tool [9] to
the photosensitive drum frame unit with the
two screws [10] removed in step 2).
6) Secure the drum motor assembly in place
with seven screws.
7) Remove the drum shaft positioning tool,
slide out the photosensitive frame unit
from the copier; then, mount the unit and
parts removed in steps 1) and 2).
COPYRIGHT © 2002 CANON INC.
CHAPTER 9 EXTERNALS / AUXILIARY MECHANISMS
CANON CLC1100/1130/1150/1160/1180 REV.1 JAN. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)
[8]
[8] [8]
Figure 9-733
[10]
Figure 9-734
[8] [8]
[7]
[9]
9-31