Canon 1130 Service Manual page 875

CHAPTER 13 TROUBLESHOOTING
CLEAR
MISC-R
MISC-P
Cont'd
13-286
COPYRIGHT © 2002 CANON INC.
FAN-ON
MTR
MTR-ON
SL
SL-ON
SHV
SHV-ON
ERR
DC-CON
R-CON
MMI-COPY
SERVICE
JAM-HIST
ERR-HIST
E354-CLR
E355-CLR
SCANLAMP
SC-MOVE
RESERVE1
RESERVE2
RESERVE3
RESERVE4
DRUM-ROT
POWEROFF
B-HP
B-ATT-TR
B-TR
B-CLN
Cont'd
CANON CLC1100/1130/1150/1160/1180 REV.3 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
starts the operation of the fan selected by 'FAN' (OK
key to start; stop key to stop)
selects each motor (enter the part No., and press the
OK key to select)
starts the operation of the motor selected in 'MTR'
(OK key to start; auto stop in 20 sec)
selects each solenoid (enter part No., and press OK
key to select)
starts the operation of the solenoid selected in 'SL'
(OK key to start; Stop key to stop)
selects each high-voltage output (enter high-voltage
No., and press OK to select)
starts operation of the high-voltage output selected in
'SHV' (OK key to start; auto stop)
clears an error code (E000, E005, E008, E020,
E717; OK key to start; turn off and then on power
switch)
initializes the RAM of the DC-CPU (OK key to
start)
initializes the RAM of the R-CPU (OK key to start)
initializes the RAM of the PANEL-CPU (OK key to
start)
initializes the backup data of service mode (OK key
to start)
clears the jam history (OK key to start)
clears the error history (OK key to start)
-
-
turns on the scanning lamp (OK key to start; auto
stop after several sec)
starts scanner movement (OK key to start; 1: HP to
A, 2: HP to B, 3: HP to C, 4: HP)
for R&D
for R&D
for R&D
for R&D
rotates the photosensitive drum to rotate idly for a
specific period of time (OK key to start; auto stop)
executes a check on the operation of auto power-off
(OK key to start)
rotates the attraction/transfer locking cam motor to
move the cam to HP (OK key to start; auto stop)
rotates the attraction/transfer locking cam motor to
move the cam to the attraction/transfer position (OK
key to start; auto stop)
rotates the attraction/transfer locking cam motor to
move the cam to the transfer position (OK key to
start; auto stop)
rotates the attraction/transfer locking cam motor to
move the cam to the transfer drum cleaning position
(OK key to start; auto stop)