Transfer Charging Assembly - Canon PC920 Service Manual

B. Transfer Charging
Assembly
1. Removing the Transfer Charging
Roller
1) Open the machine's top unit.
2) Remove the screw [1].
3) While freeing the claw [2] of the bushing,
detach the transfer charging roller [3].
Caution:
Do not touch the surface of the roller. Be
sure the surface is free of dirt.
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
[2]
[2]
Figure 4-202
[3]
[1]
4-25