CHAPTER 8 FIXING SYSTEM
2. Removing the Oil Fixing Blade
1) Open the front cover.
2) Remove the fixing cover.
3) Slide to the transfer drum frame.
4) Remove the fixing upper cover, and open
the fixing upper roller unit.
5) Remove the oil applying felt.
6) Remove the four screws [1], and remove
the fixing blade.
The oil felt is symmetrical
in shape when viewed
REF.
from above. You may turn
it over to use the other
side.
D. Internal Delivery Assembly
1. Removing the Fixing Separation
Claw
1) Open the front cover.
2) Remove the fixing cover.
3) Remove the two flat-head screws [1], and
remove the separation claw meal fixing
[2].
Take care not to lose the
claw spring.
4) Remove the four fixing separation claws.
Replace the claw spring in
the same way.
8-26
COPYRIGHT © 2002 CANON INC.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
Figure 8-435
[1]
[2]
Figure 8-436