Canon 1130 Service Manual page 152

4) Remove the CCD unit.
5) Disconnect the connector [1] from the
original scanner motor driver.
6) Disconnect the five connectors [2], and
remove the two screws [3]; then, remove
the metal fixing [4].
7) Remove the four screws [5] (M4x12), and
detach the laser scanner unit [6].
Figure 5-505
When replacing the laser
scanner unit, hold it by its
metal area or die-cast
member; do not touch the
laser driver PCB or the
lens assembly.
When replacing the laser
driver PCB, further, take
care never to touch any of
the elements.
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 LASER EXPOSURE SYSTEM
[1]
Figure 5-503
[2] [2]
[2]
Figure 5-504
[5] [6]
[5]
Figure 5-505
[2] [4]
[2] [3]
[5]
5-9