Transfer Drum Frame Right Cover; Removing The Copyboard Glass - Canon 1130 Service Manual

CHAPTER 9 EXTERNALS / AUXILIARY MECHANISMS

6. Transfer Drum Frame Right Cover

1) Pull out the registration roller knob [1].
2) Remove the three screws [2], and remove
the transfer drum frame right cover [3].
When mounting the trans-
fer drum frame right cover,
be sure that the hook at the
bottom of the cover is se-
curely fitted in the hole in
the transfer drum frame.

7. Removing the Copyboard Glass

1) Remove the two screws, and detach the
copyboard glass retainer (right).
2) Lift the right end of the copyboard glass to
detach.
When removing the
copyboard glass, do not re-
REF.
move any part except the
copyboard glass retainer
(right).
When mounting it, be sure
to secure it in place by
butting it against the left
rear while taking care so it
will not ride over the butt-
ing plate at the front and
the rear.
9-20
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
[2]
[3]
Figure 9-706