Canon 1130 Service Manual page 826

V-CONT
PASCAL
COPYRIGHT © 2002 CANON INC.
RGAN-P-K 0 to 255
P-SENS-Y 0 to 2000
P-SENS-M 0 to 2000
P-SENS-C 0 to 2000
P-SENS-K 0 to 2000
PS-ADJ-Y -32 to +32
PS-ADJ-M -32 to +32
PS-ADJ-C -32 to +32
PS-ADJ-K -32 to +32
VBACK-Y -4 to +4
VBACK-M -4 to +4
VBACK-C -4 to +4
VBACK-K -4 to +4
EPOTOFST 0 to 1023
RF-CRT-Y -25 to +25
PF-CRT-M -25 to +25
PF-CRT-C -25 to +25
PF-CRT-K -25 to +25
OFST-P-Y -127 to +128
OFST-P-M -127 to +128
OFST-P-C -127 to +128
OFST-P-K -127 to +128
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
correction of the patch gain for toner density
control when INIT-K is executed
Patch data Y reference setting when P-SENS
is executed as part of new gradation
correction control
Patch data M reference setting when P-
SENS is executed as part of new gradation
correction control
Patch data C reference setting when P-SENS
is executed as part of new gradation
correction control
Patch data Bk reference setting when P-
SENS is executed as part of new gradation
correction control
Use it to adjust offset in relation to initial
settings for patch data Y
Use it to adjust offset in relation to initial
settings for patch data M
Use it to adjust offset in relation to initial
settings for patch data C
Use it to adjust offset in relation to initial
settings for patch data K
CLC1140/1160/1180 only
Y color adjustment for de-fogging potential
(reference: 0)
M color adjustment for de-fogging potential
(reference: 0)
C color adjustment for de-fogging potential
(reference: 0)
Bk color adjustment for de-fogging potential
(reference: 0)
potential offset value (reference: 0)
offset value adjustment (%) for Y laser
strength
offset value adjustment (%) for M laser
strength
offset value adjustment (%) for C laser
strength
offset value adjustment (%) for Bk laser
strength
target value setting of Y for high-density
areas during auto gradation correction
target value setting of M for high-density
areas during auto gradation correction
target value setting of C for high-density
areas during auto gradation correction
target value setting of Bk for high-density
areas during auto gradation correction
13-239