CHAPTER 8 FIXING SYSTEM
E008
0000 This code is indicated if the oil pump driver PCB does not operate in the
0001 This code is indicated when the oil pump driver PCB is in operation
Backflow
preventing
valve
Piezo-
electric
element
Oil pump
(PSP1)
Oil pump
(PSP1)
(front)
8-8
COPYRIGHT © 2002 CANON INC.
presence of the oil pump drive signal (FXOILPD=1) generated by the
DC-CPU.
while the DC-CPU keeps the oil pump drive signal (EXOILPD=0) off.
Fixing upper roller
Oil pan
Fixing oil level sensor
(PS10)
Figure 8-203
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Oil applying felt
Oil tank
Fixing blade
Oil pipe
Fixing low roller