Canon 1130 Service Manual page 546

9) Fit the cassette heater into the groove
found at the rear of the cassette 1 stay.
In the case of the CLC1130/1160,
• If you are installing the cassette heater
for the upper cassette, fit it into the
groove found at the rear of the cassette
1 stay.
• If you are installing the cassette heater
for the lower cassette, fit it into the
groove found at the rear of the cassette
2 stay.
10) Mount the cassette heater to the stay of the
cassette with two screws.
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
Hook on the groove.
Cassette heater
Figure 11-808
Cassette heater
figure 11-809
Screws
11-49