Drive System; Removing The Deck Pickup Clutch (Cl102); Motor Assembly - Canon 1130 Service Manual

CHAPTER 10 PAPER DECK
C. Drive System
1. Removing the Deck Pickup Clutch
(CL102)
1) Remove the deck pickup unit. (p. 10-34)
2) Disconnect the connector [1], and remove
the E-ring [2]; then, detach the deck
pickup clutch [3].
When mounting the pickup
clutch, be sure to put the
clutch in the slip stop [4].
Be sure also to hook the
harness on the U groove [5]
of the guide.
2. Removing the Deck Pickup Motor
Assembly
1) Disconnect the deck from the copier; then,
remove the six screws, and detach the ear
cover.
2) Disconnect the two connectors [1] and
remove the four screws [2] of the deck
driver PCB; then, detach the deck pickup

motor assembly [3].

10-28
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[3]
[4] [2]
Figure 10-324
[1]
Figure 10-325
[5]
[2]
[3]