Stacking Paper - Canon 1130 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM
B. Stacking Paper
When its side has been processed, paper is moved to the delivery vertical path assembly as the
delivery paper deflecting plate solenoid (SL10) turns on. Then, it is moved through the duplexing
path, and is turned over by the duplexing reversing roller.
At this time, the duplexing paper feed roller solenoid (SL13), stacking guide plate solenoid
(SL15), and stopper plate solenoid (SL12) in the duplexing tray assembly turn on; as a result, the
duplexing feed roller and the stacking guide plate move up, and the stopper plate shifts up to
prepare for the arrival of paper.
Each time paper arrives at the duplexing tray assembly, the duplexing paper feed roller
solenoid (SL13) turns off, and the duplexing paper feed roller moves down to the paper. At the
same time, the stacking guide plate solenoid (SL15) turns off so that the paper will not curl, moving
down the stacking guide plate to the paper. Thereafter, the duplexing paper feed roller rotates each
time the duplexing paper feed clutch (CL14) turns on, butting the paper against the stopper plate.
Delivery paper
deflecting plate
solenoid
SL10
7-24
COPYRIGHT © 2002 CANON INC.
Duplexing motor
M14
Delivery vertical
path clutch
CL19
Figure 7-303
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Duplexing
SL13
paper feed
roller solenoid
CL14
Duplexing
SL15
paper feed
clutch
Stacking guide
plate solenoid
SL12
Stopper plate
solenoid