Canon 1130 Service Manual page 878

Level 3
HP-STR-Y Use it to stir the toner inside a specific color hopper
HP-STR-M to prevent blocking at time of installation and hopper
HP-STR-C unit replacement.
HP-STR-K Using the Item
1) Select an item (to highlight), and press the OK
key.
2) The operation will stop automatically in about 30
sec.
HP-STR-4 Use it to stir the toner inside the four color hoppers to
prevent blocking at time of installation or hopper unit
replacement.
Using the Item
1) Select the item (to highlight), and press the OK
key.
2) The operation will stop automatically in about 2
min.
INIT-D Use it to read the concentration sensor output data
once again after cleaning the black toner
concentration sensor to suit the light reflected by the
photosensitive drum.
Using the Item
1) Select the item (to highlight), and press the OK
key.
2) The operation will stop automatically.
INIT-P for R&D
COPYRIGHT © 2002 CANON INC.
Description
This item is designed to prevent
blocking of toner supplied to an
empty hopper at high speed, as
occurring at time of installation or
hopper unit replacement.
This item is designed to prevent
blocking of toner supplied to
empty hoppers at high speed, as
occurring at time of installation or
hopper unit replacement.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
Remarks
13-289